Garmin inReach Explorer for sale.  Bought two years ago.  Never used, thank goodness.  Valued at $449, selling for $300.  No taxes or shipping cost.

Fred Reid

318-446-2339

fmreid@aol.com

Alexandria, LA

Battery powered transport dolly.  Move J-3 to King Air with ease. Set up for nosewheels without wheel pants. Could be modified to use with wheel pants. Battery minder included.

Located in Jeanerette.

$ 1500.00  OBO.  No reasonable offer refused.

Contact Mike @ 985 518 5367 or chauv1@cox.net. 

Darryl Christen is now doing tailwheel and primary aerobatic training in his Decathlon in Houma.  The rate is $200/hour wet for dual instruction, with parachutes if needed.  So, if you want to get a tailwheel endorsement or get upside down for a bit then contact Darryl at 985-851-1516 or email:  darryl@dchristen.com

2000 RV-6A, 460 TT airframe, Lycoming O320A2B, 1190 since new, 460 STOH. Tru Track 2 axis AP, fuel scan system, ADSB in/out, 2020 compliant, 406 MHz ELT, CHT, EGT, OAT, new interior. Hangared in Picayune, $50K, (504)957-4756

Pristine Cessna 182R

This aircraft is not only immaculate but well equipped for IFR flights. NEW PAINT & NEW INTERIOR with all the bells & whistles

Located at KDTN

1178 Hobbs

120.9 Tach

$160,000

318.470.7059

1981 Mooney M20J

Total time airframe 3729/ engine 969 since overhaul. Prop. 574 SOH. Garmin 530 WAAS, Garmin 345 transponder, JPI 830 engine monitor, KFC 200 autopilot with flight director, PMA 8000B Audio panel, ADSB IN/OUT 2020 compliant.  Does have damage history with nose wheel collapse while taxiing 2013. Repaired by Don Maxwell, Maxwell Aviation. Flown more than 500 hours since accident with no issues. 

Interior leather seats in good condition. Needs some plastics. Exterior paint good condition and shows well. 

$119,900. Contact Lawrence Searcy 318-730-0373.

1979 310R Bearcat

5150 TT

65 SMOH IO-550’s

530W

430W

Garmin GMX200

GDL-69A

Stormscope

Radar

497 Onboard Traffic

Garmin 340 Audio Panel with 6 place intercom 

Garmin 327 Transponder

Heater AD complied with

Side brace kit installed in November during extensive annual

Asking $180,000

Located in Texas 37F

Ryan Cottingham 

940-422-4511 or ryan@pettyflyingservice.com

I am entertaining offers, 2011 Sonex 3300, Jabiru 120 HP, all glass panel, 180 TTSN, lowered seat mod, ADS-B in, fast and fun call or text for more pictures and additional info Rohn Ashley 225-301-2023.

Hancock Aviation is currently in the process of adding several new members to our aircraft maintenance team. If you have previous experience in aircraft maintenance or a strong mechanical background we may have a position for you!

Education Requirement:

--Must have High School Diploma or GED

Certificate(s) Preferred:

--Airframe & Powerplant License preferred

Experience Preferred:

--At least 3-5 years experience working with Aircraft or in a mechanical environment, preferred

--Knowledge of maintenance manuals and FAR’s

Other Requirements:

--Ability to pass a drug screening test

--Able to pass a background check

--Clean driving record

--Ability to perform work that meets/exceeds deadlines and safety requirements

--Strong Work Ethic

--Extreme Attention to Detail

Pay:

--Depends on Experience

4421 Chuck Yeager Ave, Baton Rouge, LA 70807-5255, United States

Email: info@hancockaviation.com

Phone: (225) 800-2359

https://www.hancockaviation.com/

Sport Spitfire

60% scale, 120 hp Jabiru 3300

Sensenich prop

GRT EIS

15 hr tt

Feb 2019 condition inspection

Hangared Hammond Regional KHDC

$17,000

Owner Bill Pratt 504 453-1504

FACT...Auric Avionics is your premier Garmin G1000 installation and repair facility in the Gulf South. Not many shops are entrusted by Garmin to do complete G1000 NXi installations and upgrades. Take a look at the before and after pictures below for an example of a G1000 NXi installation we completed. 1500 man hours at work!

Stop by to see us at Lakefront Airport in the Bastian-Mitchell Hangar on 6109 G. Bellanca Drive or give us a call at 504-245-0072.

http://www.auricavionics.com/

Our Airport Director at Stennis International Airport (KHSA) is retiring in June and we are looking for a colleague to lead this amazing asset! Use the link below to see the job description and to express your interest!

Click for Details

Stratus 2S for sale, $350 plus shipping of buyers choice. It can be picked up in BTR. Depending on where the buyer lives, I might be able to deliver. (Any excuse to fly is a good one) It’s in great shape and works perfectly. I’m just not using it much. 

Email traew@me.com

Textbook standard Thorp! A&P owner, 452 TT, 0-320 170HP. Day/Night VFR. BTA Thorp performance. AutoPilot, Wing tanks (49 Gal). Lightspeed ignition, 396, Avmap EKP V, Quick Cowl disconnects. Own 3 and this is most fun one to fly. 200TAS top speed. Excellent craftsmanship.  New Iberia, LA   337 849-8342

1965 Cessna 172 with a Continental O-300D. SMOH: 363 / TTAF: 2625. Fresh annual inspection. Located at KHDC. Wheel pants included, but not shown. Asking $36,000 Negotiable. Text (225) 287-4150 or email aaron.heuvel@yahoo.com for more details. 

1969 56TC Baron with normally aspirated IO540 K1B5 300 HP “STC conversion”.   The high strung  TIO541’s 380hp  have been removed.  If Beech had made an F55 or B57 baron this would have been it.  An E55 on steroids @ 5,650lbs gross T/O weight. 

TTAF 3400, TTE 100 hrs on Lyc Factory Remans (roller lifters/wide deck) , TTP 150 hrs on new Hartz props . New interior, new glass, new wing bolts, new Aluminum STC’d SRS elevator skins( no magnesium). New: silicone/ Teflon eng hoses, eng.& prop control cables. Eng. Baffles, oil coolers.  Overhauled landing gear actuator case/motor (by Cruiseair), overhauled prop governors, New flap motor and drive system,  overhauled trim actuators, brake actuators. New 406 ELT. All as per Beech service manual.  No spar cracks, 204 gal fuel. Paint 7.5/10, 

183 kts true @10k' @75% 28 gal hr, Gross weight 5,650lbs, 6 seats, large baggage door, w/factory O2, King stack: KLN90B, dual KX155A’s, KT76C transponder, G340 audio panel LED instrument and panel lighting, new nav lighting/beacons/strobes, Shaden fuel flow, Bonzer radar altimeter, Aerospace Logic digital engine gauges & fuel gauge, Voice Alert gear/stall system, Slick mags, Skytec starters, RCA B&W Radar. New com, GPS and GS antennas. Rosen sun visors… All and complete log books.……………………………..

STC is included in sale as full transfer of Supplementary Type Certificate to new owner. 

Hangared in Houma.

For a photo album click HERE

$120,000

Call 985-790-4720 or email rabazet@bellsouth.net

1947 ERCOUPE 415-CD • $16,000 • LIGHT-SPORT AIRCRAFT FOR SALE! • N94729, Hangar, KBXA, Bogalusa, LA. TTAF 1165 SMOH 838, Continental C-75-12. All AD’s complied with. Current annual, fabric wings, no rudder pedals. Auto fuel STC. ELT, Val 760 radio, Cleveland wheels and brakes, Marvel Schebler carburetor, Aerotech generator, Bendix magnetos. Runs and flies great • Contact Richard A. Kellar, Owner - located Bogalusa, LA USA • Telephone: 985-516-2841

Click For Details

Richard Nelson, Director of Aviation

Natchez-Adams County Airport Commission

Office : 601-442-5171 cell: 318-381-5576

rnelson@adamscountyms.gov

NOW HIRING: UPHOLSTERY TECHNICIAN

Our team is looking to bring on someone who is ready to take their sewing experience to the next level. All serious applicants must be willing to grow and have a positive attitude!

Job Description: 

-Must have basic knowledge of sewing skills and take any part of required training as determined by the company.

-Draw and cut various types of material such as; leather, high end fabrics, premium ultra-leather, and 100% wool carpets. 

-Building foam up and shaping for aircraft seating. 

-Interpret material drawings/patterns to ensure the finished product meets design requirements. 

-Perform documentation and proper tagging of aircraft components.

-While performing the duties of this job, technicians are required to frequently walk, sit, climb, crawl, kneel, bend, stoop, and lift. There is a need to reach and perform moderate (20-50 pounds) lifting during the use of tools, equipment, and aircraft parts. 

-Crawl in small spaces to remove and install interior parts.

Desired Qualifications and Experience: 

- Knowledge, Skills, & Creative Abilities

- Must be able to read, write, and interpret drawings, understanding symbols, and general notes.

-Knowledge of upholstery and sewing processes.

-Ability to think outside of the box, and to work quickly and energetically with our team.

-Ability to design and execute quality work in a timely fashion. 

Mandatory Qualifications:

- At least 2 years of industrial sewing experience.

- High School Diploma/GED

- The successful applicant will be subject to FAA mandated drug screens: pre-employment, and random. 

Applicants will be provided a complete job description with the invitation to interview.

Salary Range: Negotiable

If you are interested, please email your resume to:

info@acadianaaircraftinteriors.com

1966 Piper Cherokee

1/4 partnership

Based at KHSA but maybe plans to move to KASD

Total Time: 6409.7

Engine Time: 1123.2

Annual due: 12/2019

Equipment: 

• x2 narco mk 12d + TSO radios
• Narco Loc indicator 
• Narco Loc indicator with glideslope 
• Garmin 396 portable GPS
• Garmin 196 portable GPS
• Narco AT150 TSO transponder
• PS engineering P1000 4 place intercom
• Stratux ADSB-IN
• EDM JPI 700

Information 

• complete logs since 1966
• All AD’s complied with
• IFR certified
• New paint 2015
• Knots2U speed mods
• LED navigation and position lights
• LED landing light
• Door steward 
• New sky-tec starter 
• refurbished left mag

Engine: 

• Lycoming 0-360- 180 hp

Misc:

• Hangar $46 (monthly)
• hourly rate ($40 dry for maintenance)

Price: $10,500 

(Only reason I’m selling is because I’m moving)

Contact Brandon Mccaskill 985-718-2273

Structures Technician Wanted

Avionics Solutions, LLC is looking for a qualified Structures Technician to perform structural modifications consistent with heavy avionics upgrades. Candidate must have the ability to learn and ultimately operate CNC router. Rotorcraft and/or Business Jet experience required.

This is a full time position at our Lafayette, La facility.

• Must have working knowledge of structural standard practices along with FAA modification requirements and limitations. 
• A current FAA issued Airframe and Powerplant Certificate is preferred but not required. 
• Minimum of 5 yrs. structural modification experience.
• Must work well in a team setting.
• Must have basic understanding of 14 CFR part 145.

Please send resumes to jcalandra@myavionicsteam.com

New Hangars at the Baton Rouge Metro Airport are almost finished.  Have two 42’x35’ hangars and one 50’x45’ hangar left for rent or sale. 

Call Roger Shaw @225-205-1465

20% share of RV7A - $20,000. Excellent condition, IFR. Autopilot and flight director. Almost 14 kit has been installed to accommodate tall pilots. 

Airplane hangers at Pierce Aviation at Hammond LA. Call Chalmous Stewart at 2257733029 for details.

NOW FOR SALE, 20% INTEREST IN N15FP, A 1977 C-172N

Our aircraft is hangared at KMJD, Picayune Mississippi. This is a five member co-ownership non-profit LLC named Foxtrot Papa, LLC. Monthly dues are $185.00 and flight time is $75.00 per hour wet. Annual is due in May and the next IFR cert is due in September 2020. Our last two annuals (May 2017 and May 2018) were extensive and thorough by Phillips Aviation. The recent IFR cert included the installation of ADS-B in and out. (Stratus ESG and Stratus 2S) and the repair of the DME.